Download - Gehl Z80 Compact Excavator Operator’s Manual ( Serial Numbers 00701 and Up )

This is Complete Operator’s Manual for Gehl Z80 Compact Excavator.

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.

Please read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. Reading operating manual will help you and others avoid personal injury or damage to the machine. The information provided in this manual will provide the operator with the safest and most efficient way to use the machine. Knowing how to operate the machine safely and correctly will enable you to train others to operate the machine.

Use this Gehl Z80 Compact Excavator operator’s manual as a guide, Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly.

Models Covered:

Gehl Z80 Compact Excavator

Serial Numbers 00701 and Up

Manual Covers:

1. Introduction
2. Safety Information
3. Product Overview
3-1. Intended uses
3-2. Break in period
3-3. Conditions to be met to assure compliance with EPA emission standards Conditions de conformité avec les standards d’émission EPA
4. Operation License
5. Ordering Replacement Parts and Service Calls
5-1. Location of machine serial number plate
5-2. Location of engine serial number plate
5-3. Location of EPA emission control plates Localisation de la plaque signalétique EPA
5-4. Ordering replacement parts and service calls
6. Contents
SAFETY
7. Basic Precautions
8. Operating Precautions
8-1. Precautions before starting the engine
8-2. Precautions for starting the engine, working and parking
8-3. Precautions for transportation
8-4. Precautions for the battery
8-5. Precautions for towing
9. Precautions for Servicing
9-1. Precautions before servicing
9-2. Precautions during servicing
10. Safety Messages (Warning Labels)
10-1. Location of warning labels
OPERATION
11. Identification of Important Parts
11-1. Overview of the machine
11-2. Controls and switches
12. Description of Control Devices
12-1. Monitors
12-2. Switches
12-3. Control levers and pedals
12-5. Storage compartment for the operation & maintenance manual
12-4. Engine hood
12-7. Bonnet B
12-6. Tool storage space
12-8. Bonnet R
12-9. Windshield
12-10. Hammer for emergency escape from operator’s cab
12-11. Operator’s seat
12-12. Headlight
12-13. Ash tray
12-15. Cabin side door
12-14. Right window glass
12-16. Air Conditioner
12-18. Fuse
12-17. Replenishment of windshield washer fluid
12-19. External power socket
13. Operating Instructions
13-1. Checking before starting the engine
13-2. Starting up the engine.
13-3. Operating and checking instructions after starting the engine
13-4. Traveling
13-5. Steering
13-6. Stopping the machine
13-7. Swinging the upperstructure
13-8. Operating the implement
13-9. Precautions for operating the implement
13-10. Precautions for working
13-11. Precautions for going up and down a slope
13-12. Escaping from the mud
13-13. Operations using the bucket
13-14. Handling quick coupler
13-15. Parking the machine
13-16. Inspection requirements after completing operation
13-17. Stopping the engine
13-19. Locking.
13-18. Inspection requirements after stopping the engine
13-20. Handling the rubber crawlers
13-21. Handling hydraulic P.T.O.
13-22. Releasing the internal pressure of the hydraulic circuit by accumulator
13-23. Replacing the bucket without the quick coupler
13-24. Reversing the bucket without the quick coupler
14. Transportation
14-1. Loading and unloading the machine
14-2. Precautions for loading the machine
14-3. Precautions for transporting the machine
14-4. Suspending the machine
15. Care and Service in Cold Weather
15-1. Preparing for cold weather
15-3. After cold weather ends
15-2. Precautions after a day’s work
16. Long-term Storage
16-1. Before storing
16-3. Using the machine again
16-2. Storing
17. Troubleshooting
17-1. Phenomena that do not constitute faults
17-2. Towing
17-3. If the battery is over discharged..
17-4. Troubleshooting
MAINTENANCE
18. Precautions for Servicing
19. Basic Servicing Practices
19-1. Oils, fuel, and cooling water
19-2. Electrical equipment
19-3. Hydraulic system
20. Consumables
21. Fueling, Oiling and Greasing Based on Temperature Range
21-1. Fuel and oil
21-2. Cooling water
22. Standard Tightening Torque for Bolts and Nuts
22-1. Required tools
22-2. Torque table
23. Replacing Essential Parts Periodically
24. Maintenance Table
24-1. Table of service time intervals
24-2. Service intervals when using the hydraulic breaker
25. Procedures for Maintenance
25-1. First services
25-2. Nonperiodic services
25-3. Checking before start-up
25-4. Maintenance every 50 service hours
25-5. Maintenance every 100 service hours
25-6. Maintenance every 250 service hours
25-7. Maintenance every 500 service hours
25-8. Maintenance every 1000 service hours
25-9. Maintenance every 2000 service hours
SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
26. Specifications and Dimensional Diagrams
OPTIONAL PARTS AND ATTACHMENTS
27. General Precautions
27-1. Safety precautions
27-2. Precautions for mounting an attachment (implement)
28. Optional Parts and Attachments
28-1. Optional parts and attachments
NOTES
29. Maintenance Log
30. Notes

*****

====================
**Total Pages: 320
**File Format: PDF
**Language: English
**Requirements: Adobe PDF Reader & WinZip
**Compatible: All Versions of Windows & Mac, Linux OS, iPhone, iPad, Android etc.…

NO waiting! You will have instant access to your download! All pages are printable, No shipping fee, No waiting nervously for the postal delivery, you can start doing your repairs right away!

We will always try to get the full satisfaction of our customers. Even after you have purchased this manual, we will pay full attention to any issues, regardless of the nature of the situation.

THE DOWNLOAD LINK WILL ALSO BE SENT TO YOUR E-MAIL.

So please make sure your email address is correct. Don’t Forget to Check Spam / Junk if can’t find the new message in your email inbox immediately.

If you have any questions or need help, please contact us at Heavymanual1994@gmail.com

Thank you for visiting heavy-equipmentmanual.com